Project Description
FDG1270 Flange Facing Machine
A heavy-duty spindle designed on-site portable flange facer that can quickly re-face flanges and repair seal grooves and sealing surfaces efficiently and cost-effectively..
Facing Range: 14.0 – 50.0″ Clamping Range: 14.0 – 44.0″
Features:
- Quick set adjustable and jacking leg
- Swivel toolpost for grooves and bevels
- Two mounting bases.
FDG1270 Flange facer is designed with a robust spindle and a rotating arm for achieving stronger stability during cutting…
Precise Body
The heavy-duty spindle design provides precision machining within tight tolerances, even when used in a vertical orientation or upside down.
Superior Machining
It can cut “O” Ring grooves, lens ring, RTJ and other V grooves, standard and compact flange facings, weld preparations, and other surfaces.
Optional heat exchanger mounting kit & back facing kit, which allows the flange facer to be easily mounted to the heat exchanger for re-face flanges of the outer diameter and the back/lower as well as the top side of the heat exchanger.
Base assembly
Equipped two pieces mounting base unit, adjustable leg and jacking leg enable the machine to be installed quickly in any flange from 350mm to 1270mm in diameter.
Drive Power unit
The machine is driven by a 2.2HP pneumatic motor, It can achieve cuts up to a maximum depth of 2mm (0.079″) on flanges without bolt holes or 0.5mm (0.02″) with holes.
| Facing Diameter Range | 14.0-50.0″ (350-1270mm) |
| Clamping Diameter Range | 14.0-44.0″ (350-1117mm) |
| Min Swing Diameter | 37.0″ (940mm) |
| Tool Post Stroke | 4.0″ (80mm) |
| Tool Post Swivel Angle | + / – 30⁰ |
| R.P.M | 0-25 |
| Drive Power Unit-Pneumatic | 2.2hp (1.70kw) |
| Air Consumption / Supply Required | 1.80m³/min |
| Machine Weight | 275kg |
| Shipping Weight | 376kg |
| Shipping Dimensions | 1110*730*750 mm |
Feed Rates
| In | Out | Up/down | |||
| Gear | mm/rev | Gear | mm/rev | Gear | mm/rev |
| 1 | 0.128 | 1 | 0.151 | 1 | 0.03 |
| 2 | 0.251 | 2 | 0.292 | 2 | 0.06 |
| 3 | 0.591 | 3 | 0.691 | 3 | 0.15 |
2 Sets Mounting Bases
2 Year Recommended Spart Kit
2 Year Recommended Spart Kit
Heat Exchanger Mounting Kit
Back Facing Kit
Back Facing Kit
FDG1270 Flange Facer for heat exchanger
FDG1270 Flange Facer For RTJ Groove
FDG1270 Flange Facer For Len Rings
FDG1270 Flange Facer for RTJ Groove
FDG1270 Flange Facer For RTJ Groove
FDG1270 ID Mounted Flange Facer
FDG1270 Flange Facer Test In Workshop
FDG1270 Flange Facer In Our Factory
FDG1270 In Narrow Space
