FDG1650 Flange Facing Machine
An internally mounted flange facing machine for all types of flange facing, o grooves , RTJ grooves, lens ring, heat exchanger repair etc.
Facing Range: 20.0 – 65.0″ Clamping Range: 20.0 – 59.0″
- Quick set adjustable clamping jaws
- Swivel tool post for grooves and bevels
- Three mounting base.
FDG1650 Flange facer is designed with a reinforced center spindle and a rotating cutter arm for achieving stronger stability during cutting…
It can achieve working without mounting base unit, typical applications for on-site machining of heat exchanger, blind flange, and so on, This provides users with the flexibility to make more cuts including cut “O” Ring grooves, RTJ ,lens ring, and other V grooves, standard and compact flange facings, weld preparations,and other surfaces.
Precision machined dovetail ways and adjustable Turcite-B coated gibes provide smooth accurate travel, and can give machine shop accuracy .
Equipped two pieces high strength mounting base unit with steel threaded inserts, and adjustable feet enable the machine to be installed perfectly level and central in any flange from 500mm to 1650mm in diameter.
Drive Power unit
The machine is driven by a 2.9HP pneumatic motor, It can achieve cuts up to a maximum depth of 2mm (0.079″) on flanges without bolt holes or 0.5mm (0.02″) with holes.
|Facing Diameter Range||20.0-65.0″ (500-1650mm)|
|Clamping Diameter Range||20.0-59.0″ (500-1500 mm)|
|Min Swing Diameter||69.0″ (1750mm)|
|Tool Post Stroke||4.0″ (102mm)|
|Tool Post Swivel Angle||+ / – 30⁰|
|Drive Power Unit-Pneumatic||2.93hp (2.2kw)|
|Air Consumption / Supply Required||2.69m³/min|
|Shipping Dimensions||900 x 450 x 570 mm|
Operational Dimensions & Picture
Tube Flange Repair
FDG1650 Flange Facer Russia
FDG1650 Portable Flange Facer For RTJ groove
FDG1650 Flange Facer Test In Workshop